Cisco IOS Tutorial Videos and CCNA Training Online

 A complete no nonsense CCNA Training Guide for the Dreaded Cisco Exam. Coming Soon 2011!

Please let us know what the most valuable piece of training is that you are needing to pass the exam. This way the "All New CCNA Training Guide" can be geared more directly to your study needs. Even Supporting training videos included on the site are available to you.

If you learn anything from CCIEAdvisor.com please take this away with you: “(Network) Perfection is achieved not when there is nothing left to add, but when there is nothing left to take away” – Antoine de Saint-Exupery

Thank you,

CCIEAdvisor

Please see below some of the information about the exam: 640-802 CCNA Training from Cisco's Certification website.

"Cisco Certified Network Associate (CCNA®) validates the ability to install, configure, operate, and troubleshoot medium-size route and switched networks, including implementation and verification of connections to remote sites in a WAN. CCNA Training curriculum includes basic mitigation of security threats, introduction to wireless networking concepts and terminology, and performance-based skills. This new curriculum also includes (but is not limited to) the use of these protocols: IP, Enhanced Interior Gateway Routing Protocol (EIGRP), Serial Line Interface Protocol Frame Relay, Routing Information Protocol Version 2 (RIPv2),VLANs, Ethernet, access control lists (ACLs). "

Our Coming Guide for CCNA Will Train You!

And the CCNA Syllabus from Cisco States:

"The following topics are general guidelines for the content likely to be included on the Cisco Certified Network Associate exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the CCNA Guide and its contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

Describe how a network works

• Describe the purpose and functions of various network devices

• Select the components required to meet a network specification

• Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network

• Describe common networked applications including web applications

• Describe the purpose and basic operation of the protocols in the OSI and TCP models

• Describe the impact of applications such as Voice Over IP on a network

• Our CCNA Guide will help you Interpret network diagrams

• Determine the path between two hosts across a network

• Describe the components required for network and Internet communications

• Identify and correct common network problems at layers 1, 2, 3 and 7 using a layered model approach

• Differentiate between LAN/WAN operation and features

CCNA Studyfrom CCIEAdvisor.com can be a Great Reference

Configure, verify and troubleshoot a switch with VLANs and interswitch communications

• Select the appropriate media, cables, ports, and connectors to connect switches to other network devices and hosts

• Explain the technology and media access control method for Ethernet networks

• Explain network segmentation and basic traffic management concepts

• Explain basic switching concepts and the operation of Cisco switches

• Perform and verify initial switch configuration tasks including remote access management

• Verify network status and switch operation using basic utilities (including: ping, traceroute, telnet, SSH, arp, ipconfig), and SHOW & DEBUG commands

• Identify, prescribe, and resolve common switched network media issues, configuration issues, auto negotiation, and switch hardware failures

• Describe enhanced switching technologies (including: VTP, RSTP, VLAN, PVSTP, 802.1q)

• Our CCNA Trainer will Describe how VLANs create logically separate networks and the need for routing between them

• Configure, verify, and troubleshoot VLANs

• Configure, verify, and troubleshoot trunking on Cisco switches

• Configure, verify, and troubleshoot interVLAN routing

• Configure, verify, and troubleshoot VTP

• Configure, verify, and troubleshoot RSTP operation

• Interpret the output of various show and debug commands to verify the operational status of a Cisco switched network.

• Implement basic switch security (including: port security, trunk access, management vlan other than vlan1, etc.)

Implement an IP addressing scheme and IP Services to meet network requirements in a medium-size Enterprise branch office network

• Describe the operation and benefits of using private and public IP addressing with out CCNA Training Guide

• Explain the operation and benefits of using DHCP and DNS

• Guide for CCNA helps to Configure, verify and troubleshoot DHCP and DNS operation on a router (using both the CLI and SDM)

• Implement static and dynamic addressing services for hosts in a LAN environment

• Calculate and apply an addressing scheme including VLSM IP addressing to a network

• Determine the appropriate classless addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment

• Describe the technological requirements for running IPv6 in conjunction with IPv4 (including: protocols, dual stack, tunneling, etc).

• Describe IPv6 addresses

• Identify and correct common problems associated with IP addressing and host configurations

Our CCNA Trainer can help you Configure, verify, and troubleshoot basic router operation and routing on Cisco devices

• Describe basic routing concepts (including: packet forwarding, router lookup process)

• Describe the operation of Cisco routers (including: router bootup process, POST, router components)

• The Guide should help select the appropriate media, cables, ports, and connectors to connect routers to other network devices and hosts

• Configure, verify, and troubleshoot RIPv2 even though no one uses it any more our Guide will show you examples

• Access and utilize the router to set basic parameters.(including: CLI/SDM)

• Connect, configure, and verify operation status of a device interface

• Verify device configuration and network connectivity using ping, traceroute, telnet, SSH or other utilities

• Perform and verify routing configuration tasks for a static or default route given specific routing requirements

• Manage IOS configuration files. (including: save, edit, upgrade, restore)

• Manage Cisco IOS with our Training from the CCNA Training Guide

• Compare and contrast methods of routing and routing protocols

• Configure, verify, and troubleshoot OSPF

• Our Guide from CCIEAdvisor.com will train you to configure, verify, and troubleshoot EIGRP

• Verify network connectivity (including: using ping, traceroute, and telnet or SSH)

• Troubleshoot routing issues

• Verify router hardware and software operation using SHOW & DEBUG commands.

• Implement basic router security

Explain and select the appropriate administrative tasks required for a WLAN with the Certification Trainer

• Describe standards associated with wireless media (including: IEEE, WI-FI Alliance, ITU/FCC)

• Identify and describe the purpose of the components in a small wireless network. (Including: SSID, BSS, ESS)

• Identify the basic parameters to configure on a wireless network to ensure that devices connect to the correct access point

• Using our tips in the Trainer for Cisco Certified Network Associate you can Compare and contrast wireless security features and capabilities of WPA security (including: open, WEP, WPA-1/2)

• Identify common issues with implementing wireless networks. (Including: Interface, misconfiguration)

Identify security threats to a network and describe general methods to mitigate those threats

• Describe today's increasing network security threats and explain the need to implement a comprehensive security policy to mitigate the threats

• Explain general methods to mitigate common security threats to network devices, hosts, and applications

• Describe the functions of common security appliances and applications

• Describe security recommended practices including initial steps to secure network devices

Using our Certifcation Trainer you will be better equipped to Implement, verify, and troubleshoot NAT and ACLs in a medium-size Enterprise branch office network

• Describe the purpose and types of ACLs

• Configure and apply ACLs based on network filtering requirements using SDM and CLI

• Configure and apply an ACL to limit telnet and SSH access to the router using SDM and CLI

• Verify and monitor ACLs in a network environment

• Troubleshoot ACL issues on the network

• Our materials will help to explain the basic operation of NAT

• Configure NAT for given network requirements using SDM and CLI

• Troubleshoot NAT issues

Implement and verify WAN links

• Describe different methods for connecting to a WAN

• Configure and verify a basic WAN serial connection

• Configure and verify Frame Relay on Cisco routers

• Troubleshoot WAN implementation issues inside and out!

• Describe VPN technology (including: importance, benefits, role, impact, components)

• Configure and verify a PPP connection between Cisco routers"